Identify leaking equipment, reduce VOC emissions and report credible emission figures
LDAR or more specifically Leak Detection and Quantification (LDAR) is a program that identifies unintended or fugitive emissions from equipment in an oil and gas, chemical or petrochemical installation. It drives maintenance activities to reduce emissions to the atmosphere effectively.
Every potential leaking source is examined with a sniffing device PID or FID and the quantification of the emissions is following the EPA Method 21 protocol or a similar country-specific or customer-specific regulation.
We successfully executed more than 8.000 LDAR projects globally and have nearly 30 years of experience in the industry. Rely on expert LDAR measurements and advisory so you can minimize product loss and save costs.
Total Belgium has been managing their fugitive emissions with our LDAR program for more than 20 years. What do the results say after all these years?
Gas transmission company Gasunie has realized significant results over the years with our LDAR program, High Flow Sampling and IR screening.
Shell Deutschland Oil
According to Shell Deutschland Oil GmbH, LDAR is more than just holding a camera. Why did they reach out to us?
Regulations, standards and protocols we comply with
- OGCI – Oil & Gas Climate Initiative
- NEN-EN 15446
- VLAREL 11.1 and VLAREL 11.13
- MilieuMonitor 14 and 15
- NL Activiteitenbesluit / ZZS regulations
- 40 CFR Part 60, Subpart OOOOa
- AER Directive 060
- Saudi Aramco Protocol
- ADNOC Gas Processing Guidelines [Ref: HSE-GU-025 (rev 1); Dec 2018]
- QP procedure for implementation of methane leak detection and repair (LDAR) program
- Clean Air Law 5768 – 2008
Benefits of LDAR
What our customers say about our LDAR program
Want to know more about our LDAR working methodology?
Download the leaflet.